
1) Dimensionality 2) One-dimensionality
Found on
https://www.crosswordclues.com/clue/linearity

In common usage, linearity refers to a mathematical relationship or function that can be graphically represented as a straight line, as in two quantities that are directly proportional to each other, such as voltage and current in a simple DC circuit, or the mass and weight of an object. A crude but simple example of this concept can be observed i...
Found on
http://en.wikipedia.org/wiki/Linearity
[computer and video games] ===User:Fadiga09=== ...
Found on
http://en.wikipedia.org/wiki/Linearity_(computer_and_video_games)

(from the article `arts, East Asian`) ...all the sonic resources of Asian music. Indeed, there are a great variety of East Asian musics. Some are historically related and others are ...
Found on
http://www.britannica.com/eb/a-z/l/54

The closeness to which a curve approximates a straight line or the deviation of an instrument's response from a straight line.
Found on
http://www.contractorsunlimited.co.uk/glossary.shtml

A measure of how closely a graph of measurement result versus analyte concentration fits a straight line. Best stated as the range in which the measurement is linear within certain specified limits. Note that data may be 'transformed' mathematically, as in a plot of the logarithm of the measurement result versus the concentration. Note, too, that a...
Found on
http://www.dyerlabs.com/glossary/pharmaceutical.html

The extent to which any signal handling process is accomplished without amplitude distortion.
Found on
http://www.encyclo.co.uk/local/20447

The degree to which the input of a signal is proportional to the output
Found on
http://www.encyclo.co.uk/local/21048

The ability of a scale or balance to show the correct value throughout the weighing range. Usually tested by placing known weights on the balance from near zero to full capacity.
Found on
http://www.encyclo.co.uk/visitor-contributions.php

The precision with which there is a direct relationship between the incident radiation and the resultant measurement value up to a point of saturation. A linearity of 1% states that the ratio of the measured value to that of the incident radiation will not vary more than 1% from the absolute.
Found on
http://www.intl-lighttech.com/support/glossary

Type: Term Pronunciation: lin′ē-ar′ĭ-tē Definitions: 1. A relationship between two quantities whereby a change in one causes a directly proportional change in the other.
Found on
http://www.medilexicon.com/medicaldictionary.php?t=50605

The degree to which the input of a signal is proportional to the output.
Found on
http://www.rodsmith.org.uk/photographic%20glossary/rods%20photographic%20gl

The linearity of a digital voltmeter is the inaccuracy in reading which results when reading of the instrument is plotted against the actual absolute voltage input, from zero to full scale. For a perfect DPM the function is a straight line. Linearity is the greatest deviation from a straight line expressed as a percentage of full scale
Found on
https://www.encyclo.co.uk/local/20630

The maximum deviation of the calibration curve from a straight line between zero and full scale, expressed as a percent of full scale output and measured on increasing measured only.
Found on
https://www.encyclo.co.uk/local/20850

The degree to which a given transducer or amplifier can produce an equal response within its specifi
Found on
https://www.encyclo.co.uk/local/22369
No exact match found.