1) Care 2) Correctness 3) Exactitude 4) Exactness 5) Freedom from error 6) Freedom from error or defect 7) Meticulousness 8) Precision 9) Precision or exactness 10) Quality 11) Truth
Found on
https://www.crosswordclues.com/clue/accuracy
Compare with precision and trueness. Accuracy is the correctness of a single measurement. The accuracy of a measurement is assessed by comparing the measurement with the true or accepted value, based on evidence independent of the measurement. The closeness of an average to a true value is referred to as 'trueness'.
Found on
http://antoine.frostburg.edu/chem/senese/101/glossary/a.shtml
(controls) Input device terminology. The degree of closeness of an outcome to the declared target. Accuracy is only useful for comparing the ranges of input of different devices of the same type of input. e.g. the value range of pressing all the way up on the analog stick of a 360 controller versus a PS3 controller.
Found on
http://critical-gaming.com/critical-glossary/
• (n.) The state of being accurate; freedom from mistakes, this exemption arising from carefulness; exact conformity to truth, or to a rule or model; precision; exactness; nicety; correctness; as, the value of testimony depends on its accuracy.
Found on
http://thinkexist.com/dictionary/meaning/accuracy/
(R exactitate)The combined error of nonlinearity, repeatability, and hysteresis expressed as a percent of full scale output
Found on
http://www.angelfire.com/biz/BuildingPathology/BldngPathGlsry.html
(from the article `analysis`) Accuracy is the degree of agreement between the experimental result and the true value. Precision is the degree of agreement among a series of ...
Found on
http://www.britannica.com/eb/a-z/a/10
How closely a measured value agrees with the correct value.
Found on
http://www.chemistry-dictionary.com/definition/accuracy.php
Indicates how closely an analytical or assay procedure approaches the true value for a particular sample. (Note that this requires knowing what the true value is.)
Found on
http://www.dyerlabs.com/glossary/pharmaceutical.html
specified value of a parameter that represents the uncertainty in the measurement
Found on
http://www.electropedia.org/iev/iev.nsf/display?openform&ievref=415-05-12
difference between the actual value and the measured or expected value.
Found on
http://www.empiremagnetics.com/glossary/glossary.htm#A
Also known as Precision Landing, this is a competition discipline in which the skydiver attempts to land on an established target. At the National level the target is 3 cm in diameter, about the size of a quarter. Accuracy landings of various difficulty, from 20 meters to 2 meters, are required for USPA licenses. See the SIM for details
Found on
http://www.encyclo.co.uk/local/20082
How closely a measured value agrees with the correct value.
Found on
http://www.encyclo.co.uk/local/20728
Closeness of agreement between a single test result or measurement result and the true value.
Found on
http://www.encyclo.co.uk/local/20752
Ac'cu·ra·cy (#; 277)
noun [ See
Accurate .] The state of being accurate; freedom from mistakes, this exemption arising from carefulness; exact conformity to truth, or to a rule or model; precision; exactness; nicety; correctness; as, the value of testimony depends on its
accuracy . «...
Found on
http://www.encyclo.co.uk/webster/A/16
The ability to recognize words correctly
Found on
http://www.ldonline.org/glossary
A measure of the closeness of a test result to the true value.
Found on
http://www.sheepusa.org/
Ability to get the correct or true drug testing result.
Found on
http://www.translationdirectory.com/glossaries/glossary046.htm
A term used in survey research to refer to the match between the target population and the sample.
Found on
https://writing.colostate.edu/teaching_guides.cfm
Is the correctness of a measure when comparing to a known standard
Found on
https://www.encyclo.co.uk/local/20125
Accuracy is the correctness of a single measurement. The accuracy of a measurement is assessed by comparing the measurement with the true or accepted value, based on evidence independent of the measurement. The closeness of an average to a true value is referred to as 'trueness'.Typically described in terms of a maximum percentage of deviation expe...
Found on
https://www.encyclo.co.uk/local/20687
In mathematics, a measure of the precision of a number. The degree of accuracy depends on how many figures or decimal places are used in rounding off the number. For example, the result of a calculation or measurement (such as 13.429314) might be rounded off to three decimal places (13.429), to two decimal places (13.43), to one decimal place (13.4...
Found on
https://www.encyclo.co.uk/local/21221
(of a measurement). A measurement process that has a small variability is said to have high precision. This does not mean, however, that the measured value is the true value. If the measured value is M and the true value is T, then the total error = M - T. This expression can be split into Total Error = (M - dx) + (dx - T). The first expression (M....
Found on
https://www.encyclo.co.uk/local/21642
Referring to how closely a test instrument's measurements compare to a standard value, usually expressed as a percentage of the value measured.
Found on
https://www.encyclo.co.uk/local/22803
Conformity of a measured result to an accepted reference value or scale.
Found on
https://www.hunterlab.com/en/color-measurement-learning/glossary/
[Measurements] the quality of being near to the true value
Found on
https://www.vocabulary.com/lists/1162808
No exact match found.
