1) Attachment 2) Construction site job 3) Fastening 4) Using a blowtorch 5) Using an acetylene torch
Found on
https://www.crosswordclues.com/clue/welding
Welding is a fabrication or sculptural process that joins materials, usually metals or thermoplastics, by causing coalescence. This is often done by melting the workpieces and adding a filler material to form a pool of molten material (the weld pool) that cools to become a strong joint, with pressure sometimes used in conjunction with heat, or by ...
Found on
http://en.wikipedia.org/wiki/Welding
• (p. pr. & vb. n.) of Weld
Found on
http://thinkexist.com/dictionary/meaning/welding/
technique used for joining metallic parts usually through the application of heat. This technique was discovered during efforts to manipulate iron ... [10 related articles]
Found on
http://www.britannica.com/eb/a-z/w/21
an operation by which two or more parts of an assembly are united by means of heat or pressure or both in such a way that there is continuity of the nature of the materials to be joined (e.g. metals or plastics, etc.), either with or without a filler material having a melting temperature that is of the same order as that of the parent material NOTE...
Found on
http://www.electropedia.org/iev/iev.nsf/display?openform&ievref=851-01-01
There are two basic methods for applying bonding or welded seams. The first method uses an adhesive film, and the application of heat to glue or laminate two substrates together. The second method involves gluing or attaching two fabrics, using ultrasonic technology. The creation and channeling of high frequency vibratory waves cause a rapid buildu...
Found on
http://www.fabriclink.com/dictionaries/performanceglossary.cfm
use of heat to fuse two pieces of metal together.
Found on
http://www.horizonsunlimited.com/gear-up/motorcycle-terms-and-glossary
Welding is the process of joining two pieces of metal together by hammering, pressure or fusion.
Found on
http://www.probertencyclopaedia.com/browse/GW.HTM
Joining components involving fusion of the parent metal and usually the addition of a fillet of molten metal at the joint.
Found on
https://oldcopper.org/special_topics/glossary.php
A process used to join metals by the application of heat. Fusion welding, which includes gas, arc, and resistance welding, requires that the parent metals be melted. This distinguishes fusion welding from brazing. In pressure welding joining is accomplished by the use of heat and pressure without melting. The parts that are being welded are pressed...
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
Joining two or more pieces of material by applying heat or pressure, or both, with or without filler metal, to produce a loxalized union through fusion or recrystallization across the interface.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
Joining thermoplastic pieces by one of several heat-softening processes. In hot-gas welding, the material is heated by a jet of hot air or inert gas directed from a welding ?torch? onto the area of contact of the surfaces which are being welded. Welding operations to which this method is applied normally require the use of a filler rod. In Spin-Wel...
Found on
https://www.emcoplastics.com/plastic-glossary-of-terms/
Welding is the process of joining two pieces of metal together by hammering, pressure or fusion. Filler metal may or may not be used.The thickness of the filler material is much greater than the capillary dimensions encountered in brazing. The filler material has a melting point approximately the same or below that of the base metals, but always ab...
Found on
https://www.encyclo.co.uk/local/20687
The process of joining two pieces of metal by softening or melting both surfaces to be joined by the application of heat.
Found on
https://www.encyclo.co.uk/local/20873
noun fastening two pieces of metal together by softening with heat and applying pressure
Found on
https://www.encyclo.co.uk/local/20974
The process of joining materials together, usually by heating the materials to a suitable temperature.
Found on
https://www.encyclo.co.uk/local/21107
Click images to enlargeJoining pieces of metal (or non-metal) at faces rendered plastic or liquid by heat or pressure (or both). The principal processes today are gas and arc welding, in which the heat from a gas flame or an electric arc melts the faces to be joined. Additional `filler metal` is usually adde...
Found on
https://www.encyclo.co.uk/local/21221
A process by which two materials; either metals, thermoplastics, or some other material, is joined. Basically, localized melting takes place between the two materials and a filler material such as welding wire, which cools and forms a high strength joint (if the process was done correctly).
Found on
https://www.jtcmetals.com/blog/metal-glossary/
A process used to join metals by the application of heat. Fusion welding, which includes gas, arc, and resistance welding, requires that the parent metals be melted.
Found on
https://www.metaltek.com/resources/glossary/
Welding consists of heating metal on two adjacent plates and then adding new welded metal between them to make a molten pool; when cooled the pool becomes solid and a strong bond is made. A fillet weld is a weld made in an angle between two plates. A butt weld is made when two plates are end to end, with a gap between them, and the whole gap is fil...
Found on
https://www.reidsteel.com/steel-buildings/glossary/
Joining thermoplastic pieces by one of several heat-softening processes: Butt fusion, spin welding, ultrasonic, and hot gas are several methods.
Found on
https://www.teampti.com/glossary-of-terms/
A process used to join metals by the application of heat. Fusion welding, which includes gas, arc, and resistance welding, requires that the parent metals be melted. This distinguishes fusion welding from brazing. In pressure welding joining is accomplished by the use of heat and pressure without melting. The parts that are being welded are pressed...
Found on
https://www.unifiedalloys.com/resources/glossary/
Joining two or more pieces of material by applying heat or pressure, or both, with or without filler metal, to produce a loxalized union through fusion or recrystallization across the interface.
Found on
https://www.unifiedalloys.com/resources/glossary/
the joining of two or more pieces of plastic by fusion of the material in the pieces at adjoining or nearby areas either with or without the addition of plastic from another source.
Found on
https://www.usplastic.com/knowledgebase/article.aspx?contentkey=784
Joining two pieces of metal together using heat and pressure to soften the materials.
Found on
https://www.worldsteel.org/about-steel/steel-glossary.html
No exact match found.
