1) Layers upon layers
Found on
https://www.crosswordclues.com/clue/laminations
A defect appearing in sheets or strips as a segregation or in layers. To become divided, caused by gas pockets in the ingot.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
Imperfections resulting from the presence of foreign inclusions, laps, or blisters typically aligned parallel to the worked surface or rolling direction of the metal.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
Metal defects with separation or weakness generally aligned parallel to the worked surface of the metal. May be the result of pipe, blisters, seams, inclusions, or segregation elongated and made directional by working. Lamination defects may also occur in metal-powder compacts.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
The structure of unfired or fired pottery in which the materials are aggregated in the form of layers or strata.
Found on
https://walkerceramics.com.au/resources/glossary-of-ceramic-terms/
Fine layering in sediments, only millimetres thick. Often forms the internal structure in beds. See bedding
Found on
https://www.encyclo.co.uk/local/20501
Electrical circuit core parts, found in motors, generators, alternators and transformers. When core parts are subjected to alternating electrical or magnetic fields, the buildup of Eddy Currents causes physical and electrical power loss. Laminations are made of thin strips of materials that make good temporary magnets and poor permanent magnets, an...
Found on
https://www.encyclo.co.uk/local/21463
Metal defects with separation or weakness generally aligned parallel to the worked surface of the metal. May be the result of pipe, blisters, seams, inclusions, or segregation elongated and made directional by working. Lamination defects may also occur in metal-powder compacts.
Found on
https://www.unifiedalloys.com/resources/glossary/
No exact match found.
