Edges definitions

Edges

1) Adds fringe 2) Advances bit by bit 3) Advances furtively 4) Advances gradually 5) Advantages 6) An octahedron has twelve 7) Applies rickrack to 8) Ax parts 9) Barely beats 10) Barely bests 11) Barely defeats 12) Barely wins 13) Beats 1-0 14) Beats barely 15) Beats by a bit 16) Beats by a hair 17) Beats by a little
Found on https://www.crosswordclues.com/clue/edges

---

Edges

1) Advantages 2) Beats out 3) Brims 4) Brinks 5) Fringes 6) Hems 7) Limits 8) Nips 9) Rims 10) Sidles 11) Trims 12) Vees 13) Verges
Found on https://www.crosswordclues.com/clue/edges

---

Edges

The two sides of the skate blade on either side of the grooved center. There is an inside edge the edge on the inner side of the leg and an outside edge that on the outer side of the leg. There is a forward and backward for each edge, equaling a total of four different edges.
Found on http://gofigureskating.com/glossary.html

---

edges

The top, bottom, and un-hinged outer sides of a book.
Found on http://www.alibris.com/glossary/glossary-books

---

Edges

Many types of edges can be produced in the manufacture of flat rolled metal products. Over the years the following types of edges have become recognized as standard in their respective fields. . Copper Base Alloys- Slit, Slit and Edge Rolled, Sheared, Sawed, Machined or Drawn . Sheet Steels or Aluminum Sheet- Mill Edge, Slit Edge or Sheared Edge. ....
Found on https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/

---

Edges

in cut or some what positive footholds that lend themselves to accurate foot placements.
Found on https://www.alter-rock.co.uk/an-a-z-of-indoor-climbing-terms/

---

Edges

the strip edge, naturally rounded, often slit, sometimes deburred, rolled or skived
Found on https://www.encyclo.co.uk/local/21670

---

edges

The two sides of the skate blade on either side of the grooved center. There is an inside edge
Found on https://www.encyclo.co.uk/local/22613

---

Edges

Many types of edges can be produced in the manufacture of flat rolled metal products. Over the years the following types of edges have become recognized as standard in their respective fields. . Copper Base Alloys- Slit, Slit and Edge Rolled, Sheared, Sawed, Machined or Drawn . Sheet Steels or Aluminum Sheet- Mill Edge, Slit Edge or Sheared Edge. ....
Found on https://www.unifiedalloys.com/resources/glossary/

---