1) Metal forming
Found on
https://www.crosswordclues.com/clue/deep-drawing
Deep drawing is a sheet metal forming process in which a sheet metal blank is radially drawn into a forming die by the mechanical action of a punch. It is thus a shape transformation process with material retention. The process is considered `deep` drawing when the depth of the drawn part exceeds its diameter. This is achieved by redrawing the p.....
Found on
http://en.wikipedia.org/wiki/Deep_drawing
(from the article `metallurgy`) ...pulling metal through a die. One type is wire drawing. The diameter reduction that can be achieved in such a die is limited, but several dies in ...
Found on
http://www.britannica.com/eb/a-z/d/23
Forming shapedd articles or shells by forcing sheet metal into a die.
Found on
http://www.encyclo.co.uk/local/21038
Forming hollow components by using a punch and die to give significant plastic deformation.
Found on
https://copperalliance.org.uk/about-copper/copper-glossary/
The fabrication process of flat rolled steel to make drawn parts. The part is mechanically formed through or in a die. The blank diameter is reduced; the blank contracts circumferentially as it is drawn radially inward. (See Deep Drawing Applications).
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
The process of cold working or drawing sheet or strip metal blanks by means of dies on a press into shapes which are usually more or less cup-like in character involving considerable plastic deformation of the metal. Deep-drawing quality sheet or strip steel, ordered or sold on the basis of suitability for deep-drawing
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
A cold deformation process that uses a punch and die to produce hollow cylindrical components with a high length to diameter ratio (such as cartridge cases). It imparts significant cold work to the work piece.
Found on
https://www.rightonblackburns.co.uk/resources/glossary/copper
The process of cold working or drawing sheet or strip metal blanks by means of dies on a press into shapes which are usually more or less cup-like in character involving considerable plastic deformation of the metal. Deep-drawing quality sheet or strip steel, ordered or sold on the basis of suitability for deep-drawing
Found on
https://www.unifiedalloys.com/resources/glossary/
No exact match found.
