the ratio of stress to strain for a material under perfectly elastic deformation.
Found on
http://www.chemicalglossary.net/definition/1065-Modulus_Of_Elasticity
the ratio of stress to strain for a material under perfectly elastic deformation.
Found on
http://www.encyclo.co.uk/local/20089
A coefficient expressing the ratio between stress per unit area acting to deform a body and the amount of deformation that results from it. ... Modulus of volume elasticity, a coefficient expressing the ratio between pressure acting to change the volume of a substance and the amount of change that results from it. ... Synonym: bulk modulus. ... You...
Found on
http://www.encyclo.co.uk/local/20973
Rate of change of strain as a function of stress. The slope of the straight line portion of a stress-strain diagram. Tangent modulus of elasticity is the slope of the stress-strain diagram at any point. Secant modulus of elasticity is stress divided by strainat any given value of stress or strain. It also is called stress-strain ratio. Tangent and ...
Found on
http://www.instron.co.uk/wa/resourcecenter/glossary.xhtml
Type: Term Definitions: 1. a coefficient expressing the ratio between stress per unit area acting to deform a body and the amount of deformation that results from it.
Found on
http://www.medilexicon.com/medicaldictionary.php?t=55685
A measure of the rigidity of metal. Ratio of stress, within proportional limit, to corresponding strain. Specifically, the modulus obtained in tension or compression is Young's modulus, stretch modulus or modulus of extensibility; the modulus obtained in torsion or shear is modulus of rigidity, shear modulus or modulus of torsion; the modulus cover...
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
Force which would be required to stretch a substance to double its normal length, on the assumption that it would remain perfectly elastic, i.e., obey Hooke's Law throughout the twist. The ratio of stress to strain within the perfectly elastic range.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
The ratio of stress to strain in a material that is elastically deformed.
Found on
https://www.emcoplastics.com/plastic-glossary-of-terms/
A measure of the resistance of material to deformation. the ratio of normal stress corresponding strain for tensile or compressive stresses below the proportional limit of the material; elastic modulus is denoted by the symbol '2'.
Found on
https://www.encyclo.co.uk/local/21066
Refers to the stiffness of the material. The higher the modulus the stiffer the shaft. Most pump shafts have similar modules numbers. Also called Young's modulus. The relationship of stress to strain. If seal faces have a high modulus they are less likely to distort under pressure.
Found on
https://www.encyclo.co.uk/local/21120
The ratio of stress to strain below the yield point of the material.
Found on
https://www.encyclo.co.uk/local/23693
any of several coefficients of elasticity of a body, expressing the ratio between a stress or force per unit area that acts to deform the body and the corresponding fractional deformation caused by the stress. Also called
Found on
https://www.infoplease.com/dictionary/modulus-of-elasticity
In tension it is the ration of stress to the corresponding strain, within the limit of elasticity
Found on
https://www.metaltek.com/resources/glossary/
The ratio of stress to strain in a material that is elastically deformed.
Found on
https://www.teampti.com/glossary-of-terms/
A measure of the rigidity of metal. Ratio of stress, within proportional limit, to corresponding strain. Specifically, the modulus obtained in tension or compression is Young’s modulus, stretch modulus or modulus of extensibility; the modulus obtained in torsion or shear is modulus of rigidity, shear modulus or modulus of torsion; the modulus...
Found on
https://www.unifiedalloys.com/resources/glossary/
the ratio of applied stress to the associated strain developed within a material that has been elastically deformed.
Found on
https://www.usplastic.com/knowledgebase/article.aspx?contentkey=784
A measurement of the resistance of a steel to be deformed elastically and how it will restore it to its original shape after distortion.
Found on
https://www.westyorkssteel.com/technical-information/glossaryof-steel-terms
No exact match found.
