The hardenability of a metal alloy is the depth up to which a material is hardened after putting through a heat treatment process.The unit of hardenability is the same as of length. It is an indication of how deep into the material a certain hardness can be achieved. It should not be confused with hardness, which is a measure of a sample`s resist....
Found on
http://en.wikipedia.org/wiki/Hardenability
A term used to describe the propensity of an alloy to harden when subjected to rapid cooling or quenching from elevated temperatures, for example, in the heat affected zone of a weld. Normally applied to steels, hardenability increases with increase in carbon and alloy content, by causing a lowering of the transformation temperature. In welding the...
Found on
http://www.bocindustrial.co.uk/bocindustrial/technical/glossary/h.html
a measure of the depth to which a specific ferrous alloy may be hardened by the formation of martensite upon quenching from a temperature above the upper critical temperature.
Found on
http://www.chemicalglossary.net/definition/842-Hardenability
a measure of the depth to which a specific ferrous alloy may be hardened by the formation of martensite upon quenching from a temperature above the upper critical temperature.
Found on
http://www.encyclo.co.uk/local/20089
The relative ability of a ferrous alloy to form martensite when quenched from a temperature above the upper critical temperature. Hardenability is commonly measured as the distance below a quenched surfsce at which the metal exhibits a specific hardness (50 HRC, for example) or a specific percentange of martensite in the microstructure.
Found on
http://www.encyclo.co.uk/local/20742
In a ferrous alloy, the property thaet determines the depth and distribution of hardness induced by quenching.
Found on
http://www.encyclo.co.uk/local/21038
The relative ability of a ferrous alloy to form martensite when quenched from a temperature above the upper critical temperature. Hardenability is commonly measured as the distance below a quenched surfsce at which the metal exhibits a specific hardness (50 HRC, for example) or a specific percentange of martensite in the microstructure
Found on
http://www.encyclo.co.uk/local/21115
In a ferrous alloy, the property that determines the depth and distribution of hardness induced by quenching.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
In ferrous alloys, the property that determines the depth and distribution of hardness induced by quenching.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
The ability of a metal, usually steel, to harden in depth as distinguished from the terms hardness.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
The ability of a steel to be hardened by a heat treating process. Provided by the elements Manganese (Mn), Molybdenum (Mo) and Tungsten (W).
Found on
https://www.countryknives.com/knife-knowledge/steel-glossary/
In a ferrous alloy, the property that determines the depth and distribution of hardness induced byquenching. See also: Hardening, Jominy Test.
Found on
https://www.encyclo.co.uk/local/20687
The hardenability of a steel is its ability to be hardened at depth in quenching. As a general rule, the hardenability of low alloy steels increases with alloy content
Found on
https://www.steelonthenet.com/files/glossary-5.html
In a ferrous alloy, the property that determines the depth and distribution of hardness induced by quenching.
Found on
https://www.unifiedalloys.com/resources/glossary/
In ferrous alloys, the property that determines the depth and distribution of hardness induced by quenching.
Found on
https://www.unifiedalloys.com/resources/glossary/
The ability of a metal, usually steel, to harden in depth as distinguished from the terms hardness.
Found on
https://www.unifiedalloys.com/resources/glossary/
No exact match found.
