Bulk density is a property of powders, granules, and other `divided` solids, especially used in reference to mineral components (soil, gravel), chemical substances, (pharmaceutical) ingredients, foodstuff, or any other masses of corpuscular or particulate matter. It is defined as the mass of many particles of the material divided by the total vo.....
Found on
http://en.wikipedia.org/wiki/Bulk_density
(from the article `rock`) The bulk density of a rock is = /, where is the weight of grains (sedimentary rocks) or crystals (igneous and metamorphic rocks) and natural ... Although Uranus has a somewhat lower density than Jupiter, it has a higher proportion of elements heavier than hydrogen and helium. Jupiter`s greater ... Several ...
Found on
http://www.britannica.com/eb/a-z/b/127
The weight of a material per unit of volume compared to the weight of the same volume of water.
Found on
http://www.daviddarling.info/encyclopedia/B/AE_bulk_density.html
Weight per unit of volume, usually specified in pounds per cubic foot. ... (05 Dec 1998) ...
Found on
http://www.encyclo.co.uk/local/20973
The volume occupied by an aggregate. Either loose, where the aggregate is placed into a cylinder of a known volume and weighed, or compacted, where the aggregate is placed into the same cylinder and tamped down in layers and then weighed. This is expressed in Kg / M3.
Found on
http://www.encyclo.co.uk/visitor-contributions.php
is the mass per unit volume of a solid, including the voids in a bulk sample of the material.
Found on
http://www.encyclo.co.uk/visitor-contributions.php
The ratio of the weight of a material to its over-all volume (including any inherent porosity).
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
ASTM D1182-54 test method describes this measurement of mass per unit volume of a molding powder (in large volume determinations).
Found on
https://www.automotiveplastics.com/resources/glossary/
ASTM D1182-54 test method describes this measurement of mass per unit volume of a molding powder (in large volume determinations).
Found on
https://www.emcoplastics.com/plastic-glossary-of-terms/
The mass per unit volume of a molding powder as determined in a reasonably large volume. The recommended test method is ASTM D1182-54.
Found on
https://www.emcoplastics.com/plastic-glossary-of-terms/
The mass of a material (including solid particles and any contained water) per unit volume, including voids.
Found on
https://www.encyclo.co.uk/local/21122
The weight of a material per unit of volume compared to the weight of the same volume of water.
Found on
https://www.encyclo.co.uk/local/22819
The density (mass per unit of volume) of a resin in solid form (granular, nodular, pellet, powder, etc.) expressed in g/cm3 or lb/ft3.
Found on
https://www.encyclo.co.uk/local/23693
The ratio of the weight of a material to its over-all volume
Found on
https://www.metaltek.com/resources/glossary/
No exact match found.
