1) Apple chore 2) Cutting the center from 3) Hollowing out 4) Taking samples 5) Taking the middle out of
Found on
https://www.crosswordclues.com/clue/coring
Coring happens when a heated alloy, such as a Cu-Ni system, cools in non-equilibrium conditions. This causes the exterior of the material to harden faster than the interior. Coring causes the centers of the grains to retain more of the higher melting temperature element. In this case, the dendrite arms formed from the exterior have a different com...
Found on
http://en.wikipedia.org/wiki/Coring
• (p. pr. & vb. n.) of Core
Found on
http://thinkexist.com/dictionary/meaning/coring/
The method through which golf course is aerated is called coring. A machine leads to removal of plugs from the green,which leaves a hole which ensures that the roots get air and moisture.
Found on
http://www.buzzle.com/articles/golf-terminology-glossary-of-golf-terms.html
the process of cutting a vertical, cylindrical sample of the formations encountered as an oilwell is drilled. The purpose of coring is to obtain rock samples, or cores, in such a manner that the rock retains the same properties that it had before it was removed from the formation.
Found on
http://www.encyclo.co.uk/visitor-contributions.php
Taking rock samples from a well by means of a special tool -- a 'core barrel'.
Found on
http://www.oilandgasuk.co.uk/glossary.cfm
For noise reduction: Coring is used to remove fine detail information that does not contribute significantly to the detail of the picture but which adds noise to the image. Imagine the detail information viewed on a scope. About the baseline you'd see primarily the noise information, with the detail extending beyond that. Now imagine that you slice...
Found on
http://www.videohelp.com/glossary?C
A variation of composition between the center and surface of a unit of structure (such as a dendrite, a grain or a carbide particle) resulting from non-equilibrium growth over a range of temperature.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
the act of removing a core or of cutting from a central part. · core (def. 4).
Found on
https://www.infoplease.com/dictionary/coring
Variable composition due to the solidification characteristics of an alloy. Typically these compositional differences occur on a micro scale, the distances between compositional extremes being controlled by the solidification structure of the alloy.
Found on
https://www.metaltek.com/resources/glossary/
(Molded part design) — The removal of excess material from the cross section of a molded part to attain a more uniform wall thickness.
Found on
https://www.teampti.com/glossary-of-terms/
A variation of composition between the center and surface of a unit of structure
Found on
https://www.unifiedalloys.com/resources/glossary/
No exact match found.
