1) Affectionate play 2) Bit of romance 3) Gorgerin 4) Materials science 5) Molding 6) Moulding 7) Petting
Found on
https://www.crosswordclues.com/clue/necking
1) Cuddling 2) Endearment 3) Fondling 4) Gorgerin 5) Hugging 6) Kissing 7) Petting 8) Smooching 9) Snogging 10) Snuggling
Found on
https://www.crosswordclues.com/clue/necking
- the molding at the top of a column
- affectionate play (or foreplay without contact with the genital organs)
- kiss, embrace, or fondle with sexual passion
Found on
Necking can refer to: == See also == ...
Found on
http://en.wikipedia.org/wiki/Necking
[engineering] Necking, in engineering or materials science, is a mode of tensile deformation where relatively large amounts of strain localize disproportionately in a small region of the material. The resulting prominent decrease in local cross-sectional area provides the basis for the name `neck`. Because the local strains in the neck are ...
Found on
http://en.wikipedia.org/wiki/Necking_(engineering)
• (p. pr. & vb. n.) of Neck • (n.) Same as Neckmold. • (n.) Same as Neckmold. • (p. pr. & vb. n.) of Neck
Found on
http://thinkexist.com/dictionary/meaning/necking/
(from the article `materials testing`) When a material specimen is stressed, it deforms elastically (i.e., recoverably) at first; thereafter, deformation becomes permanent. A cylinder of ...
Found on
http://www.britannica.com/eb/a-z/n/21
(from the article `order`) ...of the entablature on the shaft and also acts as an aesthetic transition between those two elements. In its simplest form (the Doric), the capital ...
Found on
http://www.britannica.com/eb/a-z/n/21
Ornament at the top of a column, bottom of the capital.
Found on
http://www.castlesontheweb.com/glossary.html
On a Doric column, the necking appears as a plain section beneath the capital and above the astragal.
Found on
http://www.doric-column.com/glossary_classical_architecture.html
Ornament at the top of a column, bottom of the capital.
Found on
http://www.encyclo.co.uk/local/20018
a narrow moulding between the base and shaft of a column. See Classical Architecture.
Found on
http://www.encyclo.co.uk/local/20935
The neck-swinging behavior seen between male giraffes, usually as part of dominance and courtship rituals.
Found on
http://www.encyclo.co.uk/local/22217
the tendency of a metal bar or pipe to taper to a reduced diameter at some point when subjected to excessive longitudinal stress. See bottleneck
Found on
http://www.encyclo.co.uk/visitor-contributions.php
Neck'ing noun Same as
Neckmold .
Found on
http://www.encyclo.co.uk/webster/N/9
Localized reduction of cross-sectional area of a specimen under tensile load. It is disregarded in calculating engineering stress but is taken into account in determining True Stress.
Found on
http://www.instron.co.uk/wa/resourcecenter/glossary.xhtml
Necking is slang for love-making.
Found on
http://www.probertencyclopaedia.com/browse/ZN.HTM
A narrow moulding at the bottom of a capital that masks the junction between the capital and the shaft of the column.
Found on
http://www.virtualani.org/glossary/index.htm
Local reduction of the cross-sectional area of metal by stretching.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
Strip condition caused by the application of too much tension which causes the strip to become narrower (or stretched).
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
Reduction of the cross-sectional area of a material in a localized area caused by uniaxial tension or a machined groove or undercut in a shaft to permit mating parts to be screwed tightly against a shoulder or to provide clearance for the edge of a grinding wheel.
Found on
https://www.encyclo.co.uk/local/20687
the act of embracing, kissing, and caressing amorously; petting. · · a molding or group of moldings between the projecting part of a capital of a column and the shaft. · gorgerin.
Found on
https://www.infoplease.com/dictionary/necking
Reducing the cross sectional area of the metal in an area by stretching.
Found on
https://www.metaltek.com/resources/glossary/
Local reduction of the cross-sectional area of metal by stretching.
Found on
https://www.unifiedalloys.com/resources/glossary/
No exact match found.
