Copy of `spectrapaint - paint centre`

The wordlist doesn't exist anymore, or, the website doesn't exist anymore. On this page you can find a copy of the original information. The information may have been taken offline because it is outdated.


spectrapaint - paint centre
Category: Hobbies and Crafts > Paint and coating terms
Date & country: 02/09/2008, US
Words: 98


Abatement
Involves either removal of the painted surface, covering the painted surface with an impermeable surface, or covering surface with heavy-duty coating (encapsulant).

Acrylic
A synthetic resin used in high-performance water-based coatings. A coating in which the binder contains acrylic resins.

Adhesion
The ability of dry paint to attach to and remain fixed on the surface without blistering, flaking, cracking or being removed by tape.

Aerosol
A product that uses compressed gas to spray the coating from its container.

Air Cure
One method by which liquid coatings cure to a dry film. Oxygen from the air enters the film and cross-links the resin molecules.

Alkyd
Synthetic resin modified with oil. Coating that contains alkyd resins in the binder.

Amide
A functional group which can act as an epoxy resin curing agent.

Binder
Solid ingredients in a coating that hold the pigment particles in suspension and attach them to the substrate. Consists of resins (e.g., oils, alkyd, latex). The nature and amount of binder determine many of the paint's performance properties--washability, toughness, adhesion, color retention, etc.

Blistering
Formation of dome-shaped projections in paints or varnish films resulting from local loss of adhesion and lifting of the film from the underlying surface.

Body
The thickness or viscosity of a fluid.

Boiled Oil
Linseed (sometimes soya) oil that was formerly heated for faster drying. Today, chemical agents are added to speed up the drying process.

Butadiene
A gas which is chemically combined with styrene to create a resin used in latex binders, styrene-butadiene.

Catalyst
Substance whose presence increases the rate of a chemical reaction, e.g., acid catalyst added to an epoxy resin system to accelerate drying time.

Chalking
Formation of a powder on the surface of a paint film caused by disintegration of the binder during weathering. Can be affected by the choice of pigment or binder.

Chroma
A measurement of color. The degree of saturation of a hue. A color at its full intensity has maximum chroma.

Clear Coating
A transparent protective and/or decorative film; generally the final coat of sealer applied to automotive finishes.

Coalescent Aid
The small amount of solvent contained in latex coatings. Not a true solvent since it does not actually dissolve the latex resins, the coalescent aid helps the latex resins flow together, aiding in film formation.

Coating
A paint, varnish, lacquer or other finish used to create a protective and/or decorative layer. Generally used to refer to paints and coatings applied in an industrial setting as part of the original equipment manufacturer's (OEM) process.

Cohesion
A bonding together of a single substance to itself. Internal adhesion.

Color Retention
The ability of paint to keep its original color. Major threats to color retention are exposure to ultraviolet radiation and abrasion by weather or repeated cleaning.

Colorant
Concentrated color (dyes or pigments) that can be added to paints to make specific colors.

Colorfast
Non-fading in prolonged exposure to light.

Corrosion Inhibitive
A type of metal paint or primer that prevents rust by preventing moisture from reaching the metal. Zinc phosphate, barium metaborate and strontium chromate (all pigments) are common ingredients in corrosion-inhibitive coatings. These pigments absorb any moisture that enters the paint film.

Creosote
A liquid coating made from coal tar once used as a wood preservative. It has been banned for consumer use because of potential health risks.

Cure, Curing
The process whereby a liquid coating becomes a hard film.

Dead Flat
No gloss or sheen.

Diluent
A liquid used in coatings to reduce the consistency and make a coating flow more easily. The water in latex coatings is a diluent. A diluent may also be called a 'Reducer,' 'Thinner,' 'Reducing Agent' or 'Reducing Solvent.'

Driers
Various compounds added to coatings to speed the drying.

Dry Colors
Powder-type colors to be mixed with water, alcohol or mineral spirits and resin to form a paint or stain.

Drying Oil
An oil that when exposed to air will dry to a solid through chemical reaction with air: linseed oil, tung oil, perilla, fish oil, soybean oil.

Earth Pigments
Those pigments that are obtained from the earth, including barytes, ocher, chalk and graphite.

Eggshell
Gloss lying between semigloss and flat.

Emulsion
A mixture of solids suspended in a liquid.

Emulsion Paint
Coating in which resins are suspended in water, then flow together with the aid of an emulsifier. Example: latex paint.

Enamel
Broad classification of paints that dry to a hard, usually glossy finish. Most equipment-coating enamels require baking. Enamels for walls do not.

Epoxy
Extremely tough and durable synthetic resin used in some coatings. Epoxy coatings are extremely tough, durable and highly resistant to chemicals, abrasion, moisture and alcohol.

Extender
Ingredients added to paint to increase coverage, reduce cost, achieve durability, alter appearance, control rheology and influence other desirable properties. Less expensive than prime hiding pigments such as titanium dioxide. Examples: barium sulphate, calcium carbonate, clay, gypsum, silica, talc. May also improve coating performance.

Film Build
Amount of thickness produced in an application. Millimeters (mils) of dry film per mils of applied wet film.

Film Thickness
Depth or thickness of the dry coating in millimeters.

Fire Resistance
The ability of a coating to withstand fire or to protect the substrate to which it is applied from fire damage.

Fire Retardant
A coating which will (1) reduce flame spread, (2) resist ignition when exposed to high temperature or (3) insulate the substrate and delay damage to the substrate.

Flat
A surface that scatters or absorbs the light falling on it so as to be substantially free from gloss or sheen (0-15 gloss on a 60-degree gloss meter).

Forced Dry
Baking the paint between room temperature and 150ΓΈ F to speed the drying process.

Galvanizing
Process in which a thin coating of zinc is applied to iron or steel to prevent rust.

Gloss
The luster or shininess of paints and coatings. Different types of gloss are frequently arbitrarily differentiated, such as sheen, distinctness-of-image gloss, etc. Trade practice recognizes the following gloss levels, in increasing order of gloss: flat (or matte)-- practically free from sheen, even when viewed from oblique angles (usually less tha...

Gloss Meter
A device for measuring the light reflectance of coatings. Different brands with the same description (such as semi-gloss or flat) may have quite different ratings on the gloss meter.

Hardener
Curing agent for epoxies or fiberglass.

HEPA Vacuum
High-efficiency particulate air-filtered vacuum designed to remove lead- contaminated dust.

In-place Management
A series of steps used as an alternative to lead-based paint removal. Improves condition of intact lead-based paint to reduce and/or eliminate hazards without total removal.

Inert
A material that will not react chemically with other ingredients.

Intumescence
A mechanism whereby fire-retardant paints protect the substrates to which they are applied. An intumescent paint puffs up when exposed to high temperatures, forming an insulating, protective layer over the substrate.

Lacquer
A fast-drying usually clear coating that is highly flammable and dries by solvent evaporation only. Can be reconstituted after drying by adding solvent.

Latex-based Paint
General term used for water-based emulsion paints made with synthetic binders such as 100% acrylic, vinyl acrylic, terpolymer or styrene acrylic. A stable emulsion of polymers and pigment in water.

Lead
A metal, previously used as a pigment in paints. Discontinued in the early 1950s by industry consensus standard, and banned by the Consumer Products Safety Commission in 1978 because of its toxicity.

Linseed Oil
Drying oil made from the flax seed. Used as a solvent in many oil- based paints. 'Boiled' linseed oil can be used to protect wood from water damage. Sometimes used as a furniture polish.

Liquid Driers
Solution of soluble driers in organic solvents.

Lithopone
A white pigment of barium sulfate and zinc sulfide.

Marine Paint
Coating specially designed for immersion in water and exposure to marine atmosphere. (See also Anti-fouling Paint)

Material Safety Data Sheet (MSDS)
Information sheet that lists any hazardous substance that comprises one percent or more of the product's total volume. Also lists procedures to follow in the event of fire, explosion, leak or exposure to hazardous substance by inhalation, ingestion or contact with skin or eyes. Coatings manufacturers are required to provide retailers with an MSDS for every product they sell to the retailer. Sales...

Mineral Spirits
Paint thinner. Solvent distilled from petroleum

Monomer
Substance composed of low molecular weight molecules capable of reacting with like or unlike molecules to form a polymer.

Naphtha
A petroleum distillate used mostly by professionals (as opposed to do-it- yourself painters) for cleanup and to thin solvent-based coatings. A volatile organic compound (see VOC).

Natural Resins
Resins from trees, plants, fish and insects. Examples: damars, copals.

Nonvolatile
The portion of a coating left after the solvent evaporates; sometimes called the solids content.

Oil Paint
A paint that contains drying oil, oil varnish or oil-modified resin as the film-forming ingredient. The term is commonly and incorrectly used to refer to any paint soluble by organic solvents.

Oleoresin
A natural plant product that contains oil and resins. Turpentine is an example.

Oxidation
Chemical reaction upon exposure to oxygen. Some coatings cure by oxidation, when oxygen enters the liquid coating and cross-links the resin molecules. This film-forming method is also called 'Air Cure' and 'Air Dry.' (Oxidation also causes rust on bare metals.)

Paint
A coating including resin, a solvent, additives, pigments and, in some products, a diluent. Paints are generally opaque, and commonly represent the portion of the industry known as 'architectural coatings.'

Paint Remover
A chemical that softens old paint or varnish and permits it to be easily scraped off. Also called 'stripper.'

Penetrating Finish
A finish that sinks into the substrate, as opposed to settling on the surface.

Pigment
Insoluble, finely ground materials that give paint its properties of color and hide. Titanium dioxide is the most important pigment used to provide hiding in paint. Other pigments include anatase titanium, barium metaborate, barium sulphate, burnt sienna, burnt umber, carbon black, China clay, chromium oxide, iron oxide, lead carbonate, strontium c...

Polymer
Substance, the molecules of which consist of one or more structural units repeated any number of times; vinyl resins are examples of true polymers.

Polymerization
The interlocking of molecules by chemical reaction to produce very large molecules. The process of making plastics and plastic-based resins.

Polyvinyl Chloride
A synthetic resin used in the binders of coatings. Tends to discolor under exposure to ultraviolet radiation. Commonly called 'vinyl.'

Primer
First complete coat of paint of a painting system applied to a surface. Such paints are designed to provide adequate adhesion to new surfaces or are formulated to meet the special requirements of the surfaces.

Propellant
The gas used to expel materials from aerosol containers.

Resin
Synthetic or natural material used as the binder in coatings. Can be translucent or transparent, solid or semi-solid. Examples: acrylic, alkyd, copal ester, epoxy, polyurethane, polyvinyl chloride, silicone.

Rosin
Natural resin obtained from living pine trees or from dead tree stumps and knots.

Semi-gloss Finish
Finish that has a low luster sheen. Semi-gloss paints are formulated to give this result (usually 35-70 degrees on a 60-degree meter).

Shellac
A coating made from purified lac dissolved in alcohol, often bleached white.

Silicone
A resin used in the binders of coatings. Also used as an additive to provide specific properties, e.g., defoamer. Paints containing silicone are very slick and resist dirt, graffiti and bacterial growth, and are stable in high heat.

Solids
The part of the coating that remains on a surface after the vehicle has evaporated. The dried paint film. Also called Nonvolatile.

Solvent
Any liquid which can dissolve a resin. Generally refers to the liquid portion of paints and coatings that evaporates as the coating dries.

Source Reduction
Steps taken to reduce waste generation and toxicity at the source through more effective utilization of raw materials and reformulation.

Specular Gloss
Mirror-like finish (usually 60 degrees on a 60-degree meter).

Substrate
Any surface to which a coating is applied.

Titanium Dioxide
White pigment in virtually all white paints. Prime hiding pigment in most paints.

Turpentine
Distilled pine oil, used as a cleaner, solvent or thinner for oil-based and alkyd coatings.

Urethane
An important resin in the coatings industry. A true urethane coating is a two-component product that cures when an isocyanate (the catalyst) prompts a chemical reaction that unites the components.

Vehicle
Portion of a coating that includes all liquids and the binder. The vehicle and the pigment are the two basic components of paint.

Vinyl
See Polyvinyl Chloride

Viscosity
The property of a fluid whereby it tends to resist relative motion within itself.

VOC
See Volatile Organic Compound

Volatile Organic Compound
Organic chemicals and petrochemicals that emit vapors while evaporating. In paints, VOC generally refers to the solvent portion of the paint which, when it evaporates, results in the formation of paint film on the substrate to which it was applied.

Volatility
The defining quality of a liquid that evaporates quickly when exposed to air.

Volume Solids
Solid ingredients as a percentage of total ingredients. The volume of pigment plus binder divided by the total volume, expressed as a percent. High-volume solids mean a thicker dry film with improved durability.

Water-based
Coatings in which the majority of the liquid content is water.

White Lead
Lead carbonate