10. 
    Repeatability
    The ability of a transducer to reproduce output readings when the same measurand value is applied to it consecutively, under the same conditions, and in the same direction. Repeatability is expressed as the maximum difference between output readings as a percent of full scale.
    Found op http://www.flowmeterdirectory.com/flowmeter_technical_glossary/flowmeter_te
    
    
11. 
    Repeatability
    Repeatability or test-retest reliability is the variation in measurements taken by a single person or instrument on the same item and under the same conditions. A less-than-perfect test-retest reliability causes test-retest variability. Such variability can be caused by, for example, intra-individu...
    Found op http://en.wikipedia.org/wiki/Repeatability
    
    
12. 
    Repeatability
    degree to which a parameter can be duplicated.
    Found op http://www.empiremagnetics.com/glossary/glossary.htm#A
    
    
13. 
    repeatability
    ability of a measuring instrument to provide closely similar indications for repeated applications of the same measurand under the same conditions of measurement NOTE - For more details, see IVM 5.27
    Found op http://www.electropedia.org/iev/iev.nsf/display?openform&ievref=394-40-37
    
    
14. 
    repeatability
    closeness of the agreement between the results of successive measurements of the same measurand carried out under the same conditions of measurement NOTE - For more details, see GUM B.2.15 and IVM 3.6.
    Found op http://www.electropedia.org/iev/iev.nsf/display?openform&ievref=394-40-38
    
    
15. 
    repeatability
    difference between the upper and lower limits of the specified confidence range determined from several time measurements of a time relay under identical conditions NOTE - Preferably the repeatability is indicated as a percentage of the mean value of all measured values.
    Found op http://www.electropedia.org/iev/iev.nsf/display?openform&ievref=445-06-07
    
    
16. 
    Repeatability
    Repeatability refers to the proximity and quality of agreement between a given quantity of continuous measurements where all conditions under test (and all characteristics of test equipment) are the same in each test. If consecutive measurement tests reveal a high level of repeatability, the likelih...
    Found op http://www.used-line.com/glossaries/glossary.cfm?g_id=5
    
    

Tip: double click on a word to show its meaning.

No exact matches found.