Look up: pot-life

1. Pot life
   Length of time in which a catalyzed thermosetting resin retains sufficiently low viscosity for processing.
   Found on http://www.komprex.com/Glossary/index.ht
   
   
2. POT LIFE
   The time interval following the addition of an accelerator before chemically curing material will become too viscous to apply satisfactorily. See Shelf Life.
   Found on http://www.proofrock.com/glossary.html
   
   
3. pot life
   the time a raw material or semi-finished product retains its processing properties after final preparation (mixing of components, adding of catalysts, etc.)
   Found on http://www.electropedia.org/iev/iev.nsf/
   
   
4. POT LIFE
   Amount of time after mixing a two-part paint system during which it can be applied.
   Found on http://www.goldenglowpaints.com/Articles
   
   
5. POT LIFE
   Amount of time after mixing a two-part paint system during which it can be applied.
   Found on http://www.goldenglowpaints.com/Articles
   
   
6. Pot-Life
   The period of time after the mixing of reactive components of a multi-component paint system, during which the mixed paint can be used without detriment to it`s application properties or ultimate performance.
   Found on http://www.encyclo.co.uk/visitor-contrib
   
   
7. Pot-Life
   The time interval following the addition of an accelerator before chemically curing material will become too viscous to apply satisfactorily. See Shelf Life.
   Found on http://www.rookinspections.com/glossary/
   
   
8. Potlife
   Time, usually in hours, during which a two or three component product can be used after it is mixed. Sometimes measured in terms of time to gel and/or double in viscosity.
   Found on http://www.blowmachines.com/glossary1.ht